Journal
Surendra Bogadi, B.T.N Sridhar,“Acoustic characteristics of supersonic rectangular jets issuing from nozzles with diagonal expansion ramps’, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.43, November 2021, ISSN: 1678-5878. Publisher: Springer DOI: https://doi.org/10.1007/s40430-021-03286-w]
Balaji Rajendran, Dinesh Kumar P. K., “Influence of Cenosphere on Compression After Impact Strength of Glass Epoxy Laminates”, Engineering Research Express, Vol.3, December 2021, ISSN: 2631-8695. Publisher: IOP Science DOI: https://doi.org/10.1088/2631-8695/ac4272]
Conference
Badri Venkata Bharath, Raja. S, Suresh Chandra Khandai, “Thrust Improvement of Mpd Thurster by varying cathode to Anode Ratio”,3rd National conference on “Recent Advances in Mechanical Sciences”[NCRAMS 2021] , Rajalakshmi Engineering College ,Chennai on December 17 &18,2021.
B. Boomika, S. Anto Snowfen, T.P. Prem Anand, ”3D Simulation of Formation Flying using Esp-copter”,3rd National conference on “Recent Advances in Mechanical Sciences” [NCRAMS 2021], Rajalakshmi Engineering College, Chennai on December 17 &18,2021.
Vignesh Kumar, Santhosh Ranjan S.S, T.P. Prem Anand, “Autonomous Drone Docking for Eviation Vehicle Charging”,3rd National conference on “Recent Advances in Mechanical Sciences”[NCRAMS 2021] , Rajalakshmi Engineering College ,Chennai on December 17 &18,2021.
G.Sarankumar, G.S.Tharun Kumaar, T.P. Prem Anand, ”Design and Development of Multirole Multirotor Counter UAV”,3rd National conference on “Recent Advances in Mechanical Sciences”[NCRAMS 2021] , Rajalakshmi Engineering College ,Chennai on December 17 &18,2021.
M. Prabhu, M. Jovitha, Surendra Bogadi “Review of Thrust Vectoring Control Techniques”,3rd National conference on “Recent Advances in Mechanical Sciences” [NCRAMS 2021], Rajalakshmi Engineering College, Chennai on December 17 &18,2021.
Aditya K, Venkatesha Kishore S, Surendra Bogadi, “Lab Scale Schlieren Setup for High-Speed Flow Visualization”,3rd National conference on “Recent Advances in Mechanical Sciences” [NCRAMS 2021], Rajalakshmi Engineering College, Chennai on December 17 &18,2021.
R. Dhiren, R. Nithya, Suresh Chandra Khandai, “Experimental Analysis of A Scramjet Combustor”, 3rd National conference on “Recent Advances in Mechanical Sciences” [NCRAMS 2021], Rajalakshmi Engineering College, Chennai on December 17 &18,2021.
Jambukeswar. T. Kandaswamy, B. Jayasurya, Suresh Chandra Khandai, “Experimental Study of A Single Expansion Ramp Nozzle”,3rd National conference on “Recent Advances in Mechanical Sciences” [NCRAMS 2021], Rajalakshmi Engineering College, Chennai on December 17 &18,2021.
Naresh Kumar T, Nilesh Kumar K, Vasthadu Vasukannah DL “Design and Fabrication of Hexacopter Drone with Cutter Arm for Coconut Harvesting”, 3rd National conference on “Recent Advances in Mechanical Sciences” [NCRAMS 2021], Rajalakshmi Engineering College, Chennai on December 17 &18,2021.
B. Suraj, A. Siddarthan, Suresh Chandra Khandai, “Computational Analysis of Inlet Characteristics of Concentric Dual Mode Supersonic Inlet”, 3rd National conference on “Recent Advances in Mechanical Sciences” [NCRAMS 2021], Rajalakshmi Engineering College, Chennai on December 17 &18,2021.
Pradeep. N, Vithya M, Vasthadu Vasu Kannah DL, “JET Noise Abatement using Elliptical RingTabs”,3rd National conference on “Recent Advances in Mechanical Sciences” [NCRAMS 2021], Rajalakshmi Engineering College, Chennai on December 17 &18,2021.
Prasath S, Naveen. B, Suresh Chandra Khandai, “Computational Analysis of Partly coated Hydrophobic Aerofoil”, 3rd National conference on “Recent Advances in Mechanical Sciences” [NCRAMS 2021], Rajalakshmi Engineering College, Chennai on December 17 &18,2021.
Ivan Immanuel Michael, Jaswanth D, Balaji Rajendran, “Flexural Response & Damping Property of Hole Defect In Flax Fiber”, 3rd National conference on “Recent Advances in Mechanical Sciences” [NCRAMS 2021], Rajalakshmi Engineering College, Chennai on December 17 &18,2021.
Tharakeshwar Raghuraman, Logeshwar MS, Balaji Rajendran, “Dynamic Mechanical Analysis of FLAX/EPOXY Laminate with polypropylene particles at different temperatures”, 3rd National conference on “Recent Advances in Mechanical Sciences” [NCRAMS 2021], Rajalakshmi Engineering College, Chennai on December 17 &18,2021.
Vignesh K, Swathiga Devi C, Suresh Chandra Khandai, “Three-Dimensional Numerical Investigation of Straight and Choked Reactant Injection in an H2/Air Rotating Detonation Engine”,3rd National conference on “Recent Advances in Mechanical Sciences” [NCRAMS 2021], Rajalakshmi Engineering College, Chennai on December 17 &18,2021.
Manikandan S, Bharath H, “Design and Development of Real –Time Crop Health Monitoring Drone for Agriculture”, 3rd National conference on “Recent Advances in Mechanical Sciences” [NCRAMS 2021], Rajalakshmi Engineering College, Chennai on December 17 &18,2021.
Journal
Nameera Nilofer Khan, Ranjithkumar B, Yogesh Kumar Sinha,Suresh Chandra Khandai,“Analysis of modified lifting-line theory(1933) with multiple winglets”, International Journal of Mechanical and Production Engineering Research and Development, vol. 10(3), pp. 12545-12552, June 2020. ISSN: 2249–6890 Publisher: Trans stellar.
Kowsalya P , Ashwin V.G , Dharani J & Suresh Chandra Khandai,“ Experimental Study Of Supersonic Jet Characteristics Of A Grooved Nozzle”, International Journal of Mechanical and Production Engineering Research and Development, vol. 10(3), pp. 8617–8624, June 2020. ISSN: 2249–6890,Publisher: Trans stellar.
Rahul, J. Dharani and R. Balaji, A. “Optimal Method for Determination of Rayleigh Damping Coefficients for Different Materials using Modal Analysis”, International Journal of Vehicle Structures & Systems, vol. 13(1), pp. 102-111, January 2021. ISSN: 0975-3060 Publisher: MechAero Foundation for Technical Research & Education Excellence (MAFTREE) doi: 10.4273/ijvss.13.1.20]
Santhosh Kumar Sundareswaran , Balaji Rajendran, P.K. Dinesh Kumar, “Experimental evaluation of glass fiber composite reinforced with cellulose nanoparticles”, Materials Today: Proceedings, vol. 39(4), pp.1221-1227, March 2021 . ISSN: 2214-7853Publisher: Elsevier Ltd DOI: https://doi.org/10.1016/j.matpr.2020.04.002]
P.K Dinesh Kumar, Balaji Rajendran, Balavinayagar Subeetsha, Nagaraj Swetha, “Study on tensile, flexural and impact strength of GLARE reinforced with sugarcane bagasse ash microparticles”, Materials Today: Proceedings, June 2021, ISSN: 2214-7853, Publisher: Elsevier Ltd DOI: https://doi.org/10.1016/j.matpr.2021.06.356]
Balaji Rajendran, P.K. Dinesh Kumar, R. Vishal, S. Praveen, M. Sivaacharan, “Influence of carbon nano-filler in GFRP under dynamic loading conditions at an elevated temperature”, Materials Today: Proceedings, July 2021, ISSN: 2214-7853Publisher: Elsevier Ltd, DOI: https://doi.org/10.1016/j.matpr.2021.07.319].
Book Chapter
Jayashree. TR, Priyadarshini, Sri Harini, “Li-Fi & Wi-Fi Based Drone for Weather Monitoring with Data Storage in Cloud Using IoT”, Smart Intelligent Computing and Communication Technology, IOP PRESS,2021. doi:10.3233/APC210079
Journal
Surendra Bogadi and BTN Sridhar, “Decay of Supersonic Rectangular Jet Issuing from a Nozzle with Diagonal Expansion Ramps”, Thermal Science, Vinča Institute of Nuclear Sciences, Vol. 23(6B), pp.3929-3940, Dec 2019.
Ezhilmaran, G., Khandai, S. C., Sinha, Y. K., & Thanigaiarasu, S., “Numerical Simulation of Supersonic Jet Control by Tabs with Slanted Perforation”, International Journal of Turbo & Jet-Engines, (doi:10.1515/tjj-2019-0015), 2019
R Karthicksundar, Balaji Rajendran, P K Dinesh Kumar and S Devaganesh, "Thermal characterization of carbon nanoparticle infused GFRP using dynamic mechanical analyzer", Materials Research Express, IOP Publishing Ltd, 6(10), Aug 2019
Devaganesh, P.K. Dinesh Kumar, N. Venkatesh, R. Balaji, "Study on the mechanical and tribological performances of hybrid SiC-Al7075 metal matrix composites. J Mater Res Technol. May-June 2020.https://doi.org/10.1016/j.jmrt.2020.02.002)
Conference
Devaganesh S, Venkatesh N & P.K. Dinesh Kumar, “Investigation on Influence of Solid Lubricants over Mechanical Behavior of Hybrid Al7075-SiC Metal Matrix Composites”, International Conference on Materials and Manufacturing Methods (3M – 2019), NIT Tiruchirappalli, 5 - 7th July, 2019
Arivazhagan A, Jesurajanishnth G. and Suresh Chandra Khandai, “Design Optimization of Single Expansion Ramp Nozzle using Computational Method”, “Rotary Vanes to Increase Turbulence Inside the Combustor, 3rd International Conference on Advances in Mechanical Engineering 2020 (IOP Cinf series- Materials Science and Engineering 912), SRM Institute of Science and Technology, 24-29th February 2020.
G Jesurajanishanth , A Arivazhagan, Suresh Chandra Khandai," Rotary vanes to increase turbulence in a can type combustor",IOP Conf. Series: Materials Science and Engineering 912 (2020) 022007 IOP Publishing doi:10.1088/1757-899X/912/2/022007
R.Nisha, A.B. Moosa Naina and Surendra Bogadi,“Flow separation control and enhanced expansion of SERN nozzle flows using dielectric barrier discharge”, 3rd International Conference on Advances in Mechanical Engineering 2020, SRM Institute of Science and Technology, 24-29th February 2020.
Journal
Surya S, Swetha Sri S and Suresh Chandra Khandai, “Effect of Secondary Injection on No-Circular Jets”, International Journal of Mechanical and Production Engineering Research and Development, Trans Stellar, Vol.8, No.4, pp. 845-852, August 2018.
Surekha Rathi Samundi D, Shakthi Uma Devi , Pracheesh P and Thirumalai Kumar M, “Numerical analysis of two-dimensional wing with trailing edge flap” International Journal of Pure and Applied Mathematics, Academic Publications, Vol 119, No 15, pp. 291-299, June 2018.
Ezhilmaran G,Suresh Chandra Khandai, Pavithrabalan S, Udhayakumar K, “Supersonic Jet Control by Tabs with Slanted Perforation”, International Journal of Turbo & Jet Engines, De Gruyter, (Online published, https://doi.org/10.1515/tjj-2018-0034), October 2018.
D. Surekha R. S. , A. Khandelwal, and R. Rajasekar, “Investigation of Flow Field in Deep Dynamic Stall over an Oscillating NACA 0012 Airfoil”, Journal of Applied Fluid Mechanics,Vol.12,No.3,pp.857-863, 2019.
Conference
Abisha C., Kovardhana Guru J. and Ezhilmaran G. “Effect of lip thickness on rectangular nozzle co-flowing subsonic jet”, National Conference on Recent Advances in Mechanical Science (NCRAMS), Rajalakshmi Engineering College, 16 March 2019.
Mukesh B., Marudhavanan S. and Dinesh Kumar P. K. “Establishment of VARTM Process for Fabrication of Composite Laminates”, National Conference on Recent Advances in Mechanical Science (NCRAMS), Rajalakshmi Engineering College, 16 March 2019.
Guruvishali D., Keerthana D. and Surekha Rathi Samundi “Investigation of Aerodynamic Characteristics of Double V setup with Jet Interaction”, National Conference on Recent Trends in Aerospace Technology (NCRTAT-19), Bharat Institute of Higher Education and Research, 29 March 2019.
Kabilan A. and Saktheeswari D. “Fabrication and Testing of ARECA Fiber treated with Nano Graphite Powder”, National Conference on Recent Advances in Mechanical Science (NCRAMS), Rajalakshmi Engineering College, 16 March 2019.
BaranitharanK. And Jessima Parveen H., “Synthesis and Analysis of Paraffin based Rocket Fuel with Nano Silica”, National Conference on Recent Advances in Mechanical Science (NCRAMS), Rajalakshmi Engineering College, 16 March 2019.
Kannan G., Monica S and Surendra Bogadi. “Thrust Loss Minimization of Injector Nozzle”, National Conference on Recent Trends in Aerospace Technology (NCRTAT-19), Bharat Institute of Higher Education and Research, 29 March 2019.
Babu S., Vignesh A. R. and Dinesh Kumar P. K. “Evaluation of Hybrid Ramie/Pinapple Composite Laminate using Different Methodologies”, National Conference on Recent Advances in Mechanical Science (NCRAMS), Rajalakshmi Engineering College, 16 March 2019.
Shanmuga Sundaram Raj K. and Surendar A. “Image Stitching Algorithm with Indigenously Developed Solarcraft Model”, National Conference on Recent Advances in Mechanical Science (NCRAMS), Rajalakshmi Engineering College, 16 March 2019.
Aravind P. and Vinoth G. “Study of Mechanical Behavior of Glare Reinforced with Sugarcane Bagasse Ash Microparticles”, National Conference on Recent Advances in Mechanical Science (NCRAMS), Rajalakshmi Engineering College, 16 March 2019.
Haridoss S. and Hariharan K. “Construction and Study of Ballistic Impact for Aluminum and Fiber Composite”, TIME-2019: A National Level Conference on Unmanned Aerial Vehicles and Robotics, 29 March 2019.
Natchiappan M. and Vijay V. S. “Design and Fabrication of Microthruster”,National Conference on Recent Advances in Mechanical Science (NCRAMS), Rajalakshmi Engineering College, 16 March 2019.
Sarnya G. and Pavan Ranjith D. K. and Surendra Bogadi “Aeroacoustic Characterization of an Underexpanded Rectangular Injector Nozzle”, National Conference on Recent Trends in Aerospace Technology (NCRTAT-19), Bharat Institute of Higher Education and Research, 29 March 2019.
Journal
Gokul Raja E, Hemachandar I, Senthil Kumaran D and Muthusamy N, “Vortex Reduction Techinique on Wingtip using Spiroidal Winglet”, International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, Vol. 8 Issue 05, May-2019
Muthusamy N, Senthil Kumar C, “Comparative analysis of winglets fitted on aircraft model”, International Journal of Mechanical Engineering & Technology”, Vol 8, Issue 9, Sep 2017, pp. 321-324
Balaji Rajendran, Mohideen P, “Study of Mechanical Properties of Moisture absorbed Hybrid Composite Material”, International Journal of Engineering research and Technology, Vol 6, Issue 10, Oct 2017 (ISSN: 2278-0181)
Conference
Aathithyan A, Mugunthan K, Deepak Raj S and Mrs. Surekha Rathi Samundi D “Design and Fabrication of Tabletop low speed wind tunnel” in ‘National conference on Mechanical, Aeronautical and Civil Engineering’ (NCMACE’18), KCG College of Technology, Chennai, 28th March 2018.
Adhithya M. P., SubashD.S. and Mr.N.Muthusamy, ‘Synchronizing of hydraulic jacks for efficient aircraft operations’, National Conference on recent innovations in advanced material science RIAMS’18, Rajalakshmi Institute Of Technology, 2018
UdhayaKumar.K, PavithraBalan.S and Mr.Ezhilmaran.G “Supersonic Jet Control By Tabs With Slanted Perforation”, National Conference on Mechanical, Aeronautical and Civil Engineering’ (NCMACE’ 18), KCG College of Technology, Chennai, 28th March 2018
